Install Xposed On Redmi 2 Prime

Downloads:

   1.) Xposed v3.0.apk  - download

   2.) Xposed78miuiLP.zip - download

Procedure:

   1.) Download Xposed v3.0.apk and Xposed78miuiLP.zip from above links and copy them to internal storage of your device.

   2.) Install Xposed v3.0.apk and reboot your device into recovery mode.

          If you dont have recovery installed check How To Flash TWRP Recovery On Redmi 2 Prime.

   3.) Select Install and browse the downloaded zip file. Swipe to flash.

   4.) It may take time to reboot your phone (have patience).

Feel free to comment below.....

Myself M S Lalith signing off  !!!!!

Flash TWRP Recovery On Redmi 2 Prime

Downloads:

   1.) TWRP Recovery 3.0  - download

   2.) Minimal ADB Fastboot Driver - download

   3.) PDA Net - download

Procedure:

   1.) Download TWRP Recovery and ADB driver from the above links.

   2.) If you have any problem with drivers download PDA Net and install it after connecting your phone to PC having USB debugging enabled.

   3.) Now, goto to fastboot mode by holding Volume Down + Power and connect your device to PC.

   4.) If you don't have ADB drivers, install Minimal ADB Fastboot driver.

   5.) Open command prompt in the ADB location by holding Shift key and Right click. Select 'Open command window here'.

   6.) You can check your phone is connected or not by typing "fastboot devices" (without quotes).

   7.) Rename the recovery file as "recovery.img" and copy it to the location of your ADB files.   

   8.) Now, type "fastboot flash recovery recovery.img" (without quotes).

   9.) Type "fastboot boot recovery.img" (without quotes).

   10.) Voila, your phone reboots into TWRP Recovery.

Feel free to comment below.....

Myself M S Lalith signing off  !!!!!

Flash Cyanogen OS 12.1 (Stock ROM) On Yu Yuphoria

Downloads:

   1.) Cyanogen OS 12.1 (Stock ROM) - download

   2.) Flash Files - download

Procedure:

   1.) Download Cyanogen OS 12.1 and Flash Files from the above link.

   2.) Extract Cyanogen OS 12.1 and Flash Files in same folder.

   3.) Now put your device into Fastboot mode by pressing Volume Up + Power and connect to PC via USB.

   4.) Run flash-all.bat.

   5.) This process may take time (have some patience).

   6.) Press Volume Up to confirm.

   5.) Voila !!! Your device restarts and you can setup your Yuphoria.

Feel free to comment below.....

Myself M S Lalith signing off  !!!!!

Flash CWM Recovery To Galaxy S Duos GT S7582

Downloads:

   1.) Odin v3.07 - download

   2.) Samsung USB Driver - download

   3.) CWM Recovery - download

Procedure:

   1.) Download Odin v3.07 and run Odin v3.07 as admin.

   2.) If you have drivers problem then you can download Samsung USB Driver from above link and install it.

   3.) Deselect "Auto Reboot" and "F. Reset Time".

   4.) Click on PDA and browse the downloaded CWM Recovery.

   5.) Now, put your device into Download Mode by pressing Volume Down + Home + Power and connect to PC via USB and press Start.

   6.) When you'll get PASS message, disconnect from PC and restart your device.

Feel free to comment below.....

Myself M S Lalith signing off  !!!!!

Bypass Android Lock Screen

Downloads:

   1.) Lock Unlocker - Google Play

Procedure:

   1.) Install Lock Unlocker from the given Google Play link.

   2.) Open the app. Goto Bypasser tab and enable bypass code.

   3.) If you want, you can change the bypass code, the default bypass code is "unlock myPhone" (Recommended)

   4.) Whenever you forget your lockscreen password/pattern you can send your/default bypass code as an SMS from your friend's phone.

   5.) Voila, your phone restarts and lockscreen password/pattern is GONE FOR GOOD !!!!!!

Feel free to comment below.....

Myself M S Lalith signing off  !!!!!

Hard Reset Panasonic T40

1.) First, switch off your device or remove the battery and then insert it again.

2.) Now press and hold volume up + power for couple of seconds.

3.) When the android logo appears release the keys.

4.) Use volume up to select and volume down to navigate up and down.

5.) Now select "wipe data/factory reset" and select "Yes - delete all user data".

6.) Select "wipe cache partition" and select "Yes - wipe cache data".

7.) To restart the phone, select "reboot system now".

8.) That's it. Your phone is done reseting.

Feel free to comment below.....

Myself M S Lalith signing off  !!!!!